Advertisement

Saturday, November 21, 2026

BIMtwin HUB: A Ready-to-Use Energy Model in Minutes

Overview

BIMtwin HUB for Revit is an add-in from BIMtwin s.r.o., a Czech company. It turns a Revit model into a ready-to-use energy model in minutes, instead of the hours normally spent rebuilding the building by hand in a separate energy calculation tool. A guided export runs level by level and produces a .btwr file that opens directly in BIMtwin HUB, a web application for heat-loss calculation, energy performance assessment and building-envelope analysis. You can also send the model to BIMtwin HUB with one click, without leaving Revit. It suits designers, architects, engineers and energy specialists, and it is listed on the Autodesk App Store.

How It Works

Open your project and click Run export on the BIMtwin ribbon tab. The wizard opens an overview section where you pick the levels that form the building's real storeys. You then step through the levels one by one. Detected rooms are highlighted and synchronized both ways with Revit, so you can check the spaces, add or remove rooms, draw missing space separation lines or ignore individual walls. The add-in then builds the energy model and writes a .btwr file, or opens the model straight in BIMtwin HUB in your browser. The export runs on a temporary copy of the model, so nothing is written back to your original .rvt file.

Key Features

  • No manual re-modeling: The building envelope, spaces, constructions, layer composition and openings come straight from the Revit model.
  • Guided, level-by-level wizard: Includes two-way selection sync with Revit and automatic creation and clean-up of spaces for the energy model. Space separation lines are drawn directly in Revit.
  • Built for real models: Finishes, lining walls and toposolid terrain are excluded automatically. Curtain walls become window openings, walls cut by a sloped roof keep their real shape, and window sizes are read from the instance, the type and the geometry.
  • Complete handover: The file carries geometry, adjacency, construction assemblies with the correct layer order, and material layers. Windows and doors carry their own constructions. The .btwr output is encrypted.
  • Speed: A large project that used to take about 11.5 minutes to export now takes roughly 5.
  • Convenience: One-click handover to BIMtwin HUB in the browser with no separate sign-in in Revit, and a Czech and English interface.

About BIMtwin HUB

BIMtwin HUB is an online energy-modeling application that brings the model, the design and the heat-loss calculation into one environment. It imports models from Revit, SketchUp, IFC and gbXML. Users can adjust space zoning, edit properties, compare construction variants and see the effect on results as they work. It calculates heat losses and gains and supports energy performance assessment, following the Czech ČSN 73 0540-2 methodology. Results can be exported to tools such as PHPP, gbXML, IFC and Czech energy-certificate software. The company says the app handles volume and surface corrections automatically and lets reviewers trace every input back to the model.

Requirements and Cost

The add-in works with Autodesk Revit 2023, 2024, 2025, 2026 and 2027 on 64-bit Windows 10 or later. It needs an internet connection to export to BIMtwin HUB, and you need a BIMtwin HUB account to open and calculate the exported model. The add-in is free on the Autodesk App Store and had a single 5-star rating at press time. The BIMtwin HUB web application itself is marked as a beta version, and the sign-in page points to separate pricing:

BIMtwin HUB Pricing

Step through the storeys: detected rooms are highlighted and synced both ways with Revit.

Pick the levels that form the building's real storeys.

The BIMtwin HUB tab in Revit: start the guided export with one click.

The model in BIMtwin HUB, ready for heat-loss calculation room by room.

Export finished: open the model straight in BIMtwin HUB,
download the .btwr file or keep the edited model.

BIMtwin HUB web application preview




BIMtwin HUB is brought to you by BIMtwin s.r.o. The add-in is free. For complete BIMtwin HUB pricing, see Requirements and Cost above.

This add-in is compatible with Revit 2023-2027.

There's more information available on the Autodesk Design and Make Marketplace »



Advertisement

No comments: